Single rope winding mine hoist

2021-06-17 11:40:02

Product Introduction：

The motor transmits the power to the drum wound with wire rope through the reducer to achieve the lifting and lowering of the container; the electric drive realizes the deceleration; the disc brake is braked by hydraulic and electrical control; the position indication system realizes the depth indication of the container; The combined control system of machine, electricity and liquid composed of various sensors and control elements realizes the monitoring and protection of the whole machine; the computer and network technology are used to realize the transmission of information inside and outside the machine.

Application Range：

This series of products are used in coal mines, metal mines and non-golden mine elevators, minerals, lifting personnel and lowering materials, equipment, etc., and can also be used for other traction transportation.

SERVICE HOTLINE：

ONLINE

TECHNICAL PARAMETER PRODUCT DESCRIPTION

No.	Product serial number	winding drum				Maximum static tension of wire rope		Maximum static tension difference of wire rope		Maximum diameter of wire rope	Sum of minimum wire breaking tension	Lifting height			Maximum lifting speed (not greater than)	Speed ratio is preferred	Rotating part displacement weight (except motor and pulley)	Reference weight (without motor, electric control)	Dimensions (L * W * H)	Motor speed (not greater than)
		Number	diameter	width	Center distance of two reels	Manned	Load	Manned	Load			One layer of winding	Two layer of winding	Three layer of winding
			m		m	KN				mm	KN	m			m/s		Kg	Kg	m	r/min
1	JK-2*1.5	1	2.0	1.50	/	44	61	44	61	24	396.5	295	586	914	5.2	20.0	6600	24100	10.58.72.9	1000
																31.5	7242
2	JK-2.5*2		2.5	2.00		69	83	69	83	30	621	403	802	1245	5	20.0	13679	39460	12.89.72.9	750
																31.5	13317
3	JK-3*2.2		3.0	2.20		100	135	100	135	36	900	447	887	1378	6	20.0	19000	58340	13.510.52.9
																31.5
4	2JK-2*1	2	2.0	1.00	1.09	44	61	40		24	396.5	177	346	550	7	11.2	9740	29300	12.79.52.9	750
																20.0
																31.5	10021
5	2JK-2.5*1.2		2.5	1.20	1.29	69	83	65		30	621	215	422	670	8.8	11.2	13707	40470	13.89.52.9
																20.0	13695
																31.5	13675
6	2JK-3*1.5		3.0	1.50	1.59	100	135	90		36	900	282	553	873	10.5	11.2	21690	56924	14.4102.9
																20.0	22588
																31.5	22336
7	2JK-3.5*1.7		3.5	1.70	1.79	136	170	115	115	42	1230	324	635	/	12.3	11.2	26171	75456	15.110.42.9
																20.0	26526
8	2JK-4*2.1		4.0	2.10	2.19	216	245	160	160	50	1962	405	790	/	12.6	11.2	42400	106000	18.810.82.9	600
																20.0	42400
9	2JK-5*2.3		5.0	2.30	2.39	280		180	180	62	2520	458	895	/	12	11.2	49272	146625	16.712.42.9	500
																20.0

Technical parameter:

1. Adopt integral, two-lobed and four-lobed reels;

2. The reel rope groove adopts spiral rope groove pressed by engineering plastic lining, and a steel rope transition device is arranged between the layers;

3. The rear disc brake of the oil cylinder is adopted, and the electric-hydraulic joint control is adopted; the hydraulic station is divided into two types of medium pressure and medium and high pressure. The medium-pressure hydraulic station has two types of constant braking force electrical delay and hydraulic delay two-stage braking; the medium-high pressure hydraulic station has two types of constant deceleration and constant braking torque two-stage braking. The hydraulic station can be equipped with pressure sensors and pressure relays;

4. The main shaft and the reel are connected by a plane large torque friction;

5. The signal monitoring device composed of photoelectric encoder, self-tuning angle machine and low-speed DC speed measuring generator has perfect monitoring and protection functions of overspeed, overwinding, depth indication failure brake shoe wear, spring fatigue, etc .;

6. The console has two types: integral type and split type, all using integrated signal lights, reliable electrical instruments and new integral operating handles, and there are digital depth indicators and digital and screw type depth indications as one. Depth indicator system. All have special countertops such as industrial TV or computer, printer;

7. The skywheel device adopts integral or two-lobed cast-welded structure, adopts rolling bearing support and is equipped with friction pads of polyvinyl chloride or nylon on the rim;

8. It can be equipped with mine hoist network control and remote diagnosis system;

Complete supply range:

Mainframe, wheel-mounted, different types of control consoles, depth indicators, hydraulic station #sliding station; electric drag and control system, information transmission system; upon user request, other specifications of products can also be produced to meet the needs Demand.

PREV：Multi-rope friction floor hoist
NEXT：No records

Hoist

Single rope winding mine hoist

Technical parameter:

Complete supply range: